|
|||||||||
|
|||||||||
| Measurements
1. Gap - the distance between the left and right edges of the gap. Determination of the edge of the gap is |
| critical
to the measurement. Edge selection can be made visually by the operator
in on-screen measurements. In automated measurements, edge selection
is made using a number of different methodologies.
2. Flush - the height difference between the left and right panels on either side of the gap. Industry Examples
|
| Controllers
and Sensors
The field-of-view of the sensor should be sufficient to capture the maximum width of the gap plus enough of the surface on either side of the gap to establish the flushness. All controller and sensor combinations would be candidates for use on this application. Sensor stand-off's that guide the sensor into position over the gap would be important to the ease of use and repeatability of results. |
||
|
Madison, Alabama 35758 Phone 256-461-1313 Fax 256-461-1390 origintech.com |
||